Click on Link for detailed explanation of Biosyntonie( a must read)

    Biosyntonie®Computer Protection protects you form EMF radiation from your computer.Most people will feel immediately the improvement in their well being after placing the protection devices on the computer. You may add CHLO1 white egg on an electric cable near the computer in order to expedience greater benefits.Computer Protection for the key board and the monitor: One 2.5 inch disc and five 1.5 inch discs. Total of 6 discs.LCD Monitor and key board: 6 small discs for the key board. 4 small ovoid discs and 2 large disks for the monitor. Total of 12 discs Protection for the tower: One 2.5 inch disc and three 1.5 inch discs. Total of 4 discs.Complete set of both above: 10 discs.Instructions:Monitor: Put 2 small discs on both lateral anterior corners of the monitor. Put one small disc on the top middle portion of the monitor neat the anterior edge of the top. Place the large disc on the back of the monitor on the mid portion.LCD Monitor:Place 4 small ovoid discs on the 4 corners of the screen on the anterior surface. Place 4 small discs on the 4 corners of the posterior surface. Place the 2 large discs on the posterior surface on each side of the stand at the mid portion.Key Board:Place two small discs on each side of he key board. On the top (see above) on the sides, or under the keyboard.Tower:Place 2 small discs on both lateral anterior corners of the tower. Put one small disc on the top middle portion of the tower neat the anterior edge of the top. Place the large disc on the back of the Tower.Please note:Each disc has flower side or "passive side" and picture side or the "active side where the two side adhesive tape is located. The picture side where the adhesive side is located is always pointed to the source of pollution.Caution: The discs will never change their protective properties and they will never expire, as long as they are not broken. If they are broken please do not glue them. If glued they will not function properly and they should be replaced If the edges are slightly chipped the discs will function properly and do not need to be replaced. Make sure that the surface you glue the discs on is clean and dry. You can also replace the tape with industrial strength Velcro to replace the tape. The discs can be easily cleaned with detergent and water. If the discs need to be applied to a ceiling make sure that the disc is attached firmly to the surface. You may also put the disc in a soft plastic box such as cassette tape box and attach it to the ceiling with strong adhesive two side tape or Velcro.

 We provide 60 days money back guaranteed if you are not satisfied.